Rockwell Automation 1755-OF8 GuardPLC Controller Systems - Manual (Page 179)

Publication 1753-UM001C-EN-P - March 2010 179
Configure Peer-to-Peer Communication Chapter 17
Add Controllers to Token Group(s)
A controller must be a member of only one token group. To add a
controller to a token group, follow these steps.
1. Expand the HH-Network, right-click a token group, and choose
Node Editor.
The Node Editor is empty when you open it for the first time.
2. Click a controller in the tree view and drag and drop it in the
Node Editor.
Configure Token Group(s)
1. Right-click the token group and choose Properties.
2. In the HH-Network/Token Group dialog box, choose a profile.
For a description of the HH-Network profiles, see page 161 . In
general, Fast works with most network topologies.
3. Enter a Token Group ID.
The Token Group ID must be greater than 0. If you create more
than one token group, each token group must have a unique ID.
4. Do not make changes to the other settings in this dialog box.
See page 153 for the description of the HH protocol parameters.