Rockwell Automation 1755-OF8 GuardPLC Controller Systems - Manual (Page 207)

Publication 1753-UM001C-EN-P - March 2010 207
Introduction to EtherNet/IP Communication Chapter 18
4. To add a shortcut for the GuardPLC controller to your
application, double-click Communication Setup under the
RSLinx Enterprise Server.
5. On the Design (Local) tab, select the GuardPLC controller.
6. On the Device Shortcuts pane, click Add and type a name for
the shortcut.
When you choose a name for the shortcut, note that because
there is no tag browsing for GuardPLC controllers, you will have
to type this shortcut name for each object in your graphic
displays.