Create an ethernet/ip application – Rockwell Automation 1755-OF8 GuardPLC Controller Systems User Manual
Page 244
244
Publication 1753-UM001C-EN-P - March 2010
Chapter 19 Use GuardPLC Controller as an Adapter
5. Save and download your application.
These steps are described in more detail beginning on page
For more information on PanelView Standard terminals and using
PanelBuilder32 software, refer to the following:
•
PanelView Standard Operator Terminals User Manual,
publication
•
PanelBuilder32 Application Development Software for
PanelView Standard Terminals Quick Start, publication
Create an EtherNet/IP Application
Follow these steps to create a new EtherNet/IP application in
PanelBuilder32 software.
1. Select Create New Application from the PanelBuilder32 start-up
screen and click OK.
2. Enter a name for your application.
3. Select your PanelView terminal and EtherNet protocol.
4. Click OK.