Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1004)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
988 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Measured value
Range
-200.0 ... 200.0 µA
Time
Range
0.0 ... 999999.9 s
5.6.4.7 MEAS T
5.6.4.7.1 MEAS T - Overview
Dialog window: Method ▶ MEAS T ▶ Properties... ▶ MEAS T - 'Command name'
Command for temperature measurements.
Instruments
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 851, 852, 857, 888, 901, 902,
904, 905, 906, 907
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 785, 794, 798,
799
pH/Ion - Meter: 867
Robotic Titrosampler: 855
Conductometer: 856
Appearance
The command has the following appearance:
Parameters
The parameters for the command MEAS T are configured on the follow-
ing 4 tabs:
￭ General/Hardware
Parameters for devices, sensors and stirrers.
￭ Measuring parameters
Parameters for setting the measurement procedure.
￭ Evaluations
Defining further methods for evaluating measurement curves.
￭ Additional measured values
Defining further measured values which can be saved as additional col-
umns in the measuring point list.