Metrohm tiamo 2.3 Patch 1 (process analysis) User Manual
Page 303
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiamo 2.3 Patch 1 (for Process Analysis)
￭￭￭￭￭￭￭￭
287
<vr val="" />
<vf val="" />
</td>
</tableBody>
</MeasPoints>
– <EndPoints dynamic="">
Endpoints
– <data>
<ept val="" />
Designation of the endpoint.
<epvx val="12.1835" />
X value of the endpoint.
<epux val="mL" />
Unit of the x value of the endpoint.
<epvy val="518.5" />
Y value of the endpoint.
<epuy val="mV" />
Unit of the y value of the endpoint.
</data>
</EndPoints>
– <Monitoring dynamic="">
Monitoring data
– <Monitoring>
Data on monitoring.
<subtype val="" />
Monitoring type.
<monType val="" />
Monitored value.
– <MonitorTable>
Events during monitoring.
– <header>
Column headers.
<time val="" />
Column header for time.
<limit val="" />
Column header for limit value type.
<limitVal val="" />
Column header for limit value.
<monVal val="" />
Column header for measured value.
<volume val="" />
Column header for volume.
<otherVal val="" />
Column header for temperature, measured value pH or
measured value mV.
<action val="" />
Column header for action.
</header>
– <body dynamic="">
– <data>
<time> ... </time>
Time in s.