Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 128)

3.3 Sample tables ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
112 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Jump to the first line in the sample table.
Jump to the previous line in the sample table.
Option of entering the desired line number to which the program jumps
when the [Enter] is actuated.
Jump to the next line in the sample table. If the end of the table has been
reached, then a new line will be inserted automatically and the program
will jump to it.
The same function can also be triggered by pressing the [Enter] key.
Jump to the last line in the sample table.
Jump to a new, empty line.
Displaying application note
on | off (Default value: off)
If this check box is activated, then the application note defined in the
method will be displayed during the editing of the sample data.
Functions
[Apply]
Apply the sample data entered in the respective line of the sample table. If
the end of the table has been reached, then a new line will be generated
automatically. The same function can also be triggered by pressing the
[Enter] key. The next line will in addition however also be marked auto-
matically when the [Enter] is used.
[Exit]
Closes the input window. The current sample data will not be applied in
the sample table thereby (this needs to be triggered beforehand with
[Apply]).