Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 312)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
296 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
– <eltDoubleBufferResult2> ... </
eltDoubleBufferResult2> Results for buffer pH 4/7.
– <eltDoubleBufferResult3> ... </
eltDoubleBufferResult3> Results for buffer pH 7/9.
– <eltDriftResult> ... </eltDrif-
tResult> Results for drift measurements.
</ELTResults>
4.4.4.3.13 XML export - Colorimetric sensors
XML export
– <Colorreagents dynamic=""> Data of the colorimetric sensors.
– <Colorreagent> Data of the colorimetric sensor.
<crName val="" /> Name of the sensor.
<crWavelength val="" /> Wavelength.
<crc0 val="" /> Calibration coefficient zeroth-order.
<crc1 val="" /> Calibration coefficient first-order.
<crc2 val="" /> Calibration coefficient second-order.
<crc3 val="" /> Calibration coefficient third-order.
<crConfidence val="" /> Confidence interval.
<crOutlier val="" /> Number of outliers.
<crCoeffDeterm val="" /> Coefficient of determination.
<crCalibTemp val="" /> Calibration temperature.
<crCalibRange val="" /> Calibration range.
<crCalibTime val="" /> Calibration date.
<crCalibMethod val="" /> Calibration method.
<crCalibDetermID val="" /> Determination ID.
<crUser val="" /> User.
</Colorreagent>
</Colorreagents>
4.4.4.3.14 XML export - Method parameters
XML export