Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 283)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 267
+ <Determination> Determination data
+ <Method> Method data
+ <Sample> Sample data
+ <Results dynamic=""> Results overview
+ <ResultaSingle=""> Single results
+ <Command Data dynamic=""> Command variables
+ <Comvars dynamic=""> Common variables
+ <Globalvars dynamic=""> Global variables
+ <usedDevices dynamic=""> Device data
+ <usedSensors dynamic=""> Sensor data
+ <TcSampleSolutions
dynamic=""> Sample solutions (TC conductivity)
+ <ELTResults=""> Electrode test
+ <Colorreagents dynamic=""> Data of the colorimetric sensors.
+ <Method params dynamic=""> Method parameters
+ <Statistics> Statistical data
–<System> System data
<userName val="" /> User name (short name)
<userNameFull val="" /> User name (full name)
<clientName val="" /> Client ID
<progVersion val="" /> Program version - Build number
<licenseRoot val="" /> License code
</System>
</DeterminationReport>
Note
dynamic= means that the following nodes can appear more than
once.
The actual data is situated between " ".