Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 411)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 395
Curve
Curve color
Selection of a color for the line of the curve.
Selection 13 colors | pink
Default value pink
Symbol
Selection of the symbol for the display of the individual measuring points.
Not editable for MEAS Ref and MEAS Spec commands
Selection
5 symbols | no symbol
Default value no symbol
no symbol
Measuring points are not shown.
Note
With curves, for which the distance between two measuring points is
smaller than 5 pixels, the individual measuring points are not displayed
anymore, even if a symbol has been selected. In this case, the graphics
window can perhaps be enlarged in order to display the symbols again.
Symbol color
Selection of the color for the measuring point symbol.
Not editable for MEAS Ref and MEAS Spec commands
Selection
13 colors | pink
Default value pink
Smoothing
Smoothing
on | off (Default value: on)
Activates/Deactivates smoothing for the curve.
Smoothing factor x axis
Factor for smoothing on the x axis.
Range 0.01 ... 1000
Default value 0.01