Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1699)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 8 Manual control
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1683
Port
Display of the internal description of the port.
Type
Display of the port type.
Status
Display of the current status.
Selection ACTIVE | INACTIVE | ERROR
Graphical display
Overview of the states of a digital input:
ACTIVE INACTIVE ERROR
Display flashes
8.4.6.3 Digital outputs
8.4.6.3.1 Digital outputs - Overview
Program part: Manual control
If in the device tree the branch Digital outputs is selected, then all out-
puts can be controlled jointly on the tabs Switch on/off and Set default
in the subwindow functions/parameters. In the subwindow for the graphi-
cal display the status of all connected digital outputs is shown in their
physical order.
Switching on/off
[Start]
Sets all digital outputs to ACTIVE.
[Stop]
Sets all digital outputs to INACTIVE.
Setting a default
[Set]
Resets all digital outputs to the default value in the configuration.