Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 227)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 211
Edit
on | off (Default value: off)
Enables/disables the right to edit the database. Records can be revised or
deleted.
Note
If access for editing is enabled, then access rights for reading will also
automatically be enabled. If access for editing is disabled, then access
rights for reading will also automatically be disabled.
4.3.5.4 Database properties - Backup
Tab: Database ▶ File ▶ Database manager... ▶ Database manager ▶ [Proper-
ties] ▶ Properties - Database - 'Database name' ▶ Backup
Definition of backup monitoring and automatic backups.
Backup monitoring
on | off (Default value: off)
Enables/disables the backup monitoring for the selected database. If the
check box Backup monitoring is enabled, then the field Next backup
in the database table will be marked in red when the interval time elap-
ses.
Last backup
Shows the date and time of the last database backup.
Next backup
Date at which the next backup must take place. The date can be selected
by pressing in the dialog window Select date.
Input Date selection
Default value Last backup + 1 month
Interval
Entry of the interval for the backup monitoring. After each automatically
or manually triggered backup, the interval entered here will be added
automatically to the Last backup and the field Next backup will be
automatically adjusted accordingly.
Range 1 ... 999
Default value 1
Selection day(s) | week(s) | month(s) | year(s)
Default value month(s)