Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 264)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
248 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Selection of the type of line for the rectangle.
Switches the fill color on and off.
Selection of the fill color.
4.4.1.4.3.12 Report template - Curve field
Program window: Database ▶ Report template
Curve fields are used for showing determination curves in the report.
Insert
In order to insert a curve in a report template the corresponding symbol
must be selected on the Module bar and then placed on the report tem-
plate by creating a field with the left mouse button.
Properties
Note
The properties are saved individually for each curve field. This means
that it is possible, e.g., to show several different curves for the same
measuring command beside one another in several curve fields.
X pos.
x-position within the permitted section.
Range 0.0000 ... (max. page width) mm
Y pos.
y-position within the permitted section.
Range 0.0000 ... (max. page height) mm
Width
Width of curve field.
Range 0.0000 ... (max. page width) mm
Height
Height of curve field.