Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1510)

7.2 Titrino ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1494 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Old version
Shows the old device program version.
New version
Shows the new device program version to be loaded.
[Load]
Loads new program version.
Note
Make sure that the device is not manipulated or switched off during the
loading process and follow the instructions shown.
7.2 Titrino
7.2.1 Titrino - Overview
The parameters for the 702, 716, 718, 719, 720, 721, 736, 751,
758, 784, 785, 794, 795, 798 and 799 Titrinos are set on the follow-
ing tabs:
￭ General
General device information such as device name, device type, serial
number, etc.
￭ Int. dosing device D0
Properties of the internal dosing device.
￭ Ext. dosing device D1/D2
Properties of the connected external dosing devices (685 Dosimat or
700 Dosino).
Note
These tabs for external dosing devices are only available for 736, 751,
758 and 799 Titrinos.
￭ RS-232
Selection of the serial interface the Titrino is connected to.
￭ GLP
Information on GLP tests and GLP monitoring.
Program versions
tiamo supports only the following program versions of the Titrinos: