Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1684)

8.4 Manual control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1668 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
￭ General
￭ Move
￭ Assign position
￭ Pump
￭ Heater/Gas
Instruments
The sample changer functions can be carried out with the following devi-
ces:
730, 774, 778, 789, 814, 815, 855, 864, 874
8.4.4.2 Sample changer - General
Program part: Manual control
Information on the rack attached is displayed here. In addition, shift and
lift rate for manual sample changer control can be set.
Rack name
Shows the name of the rack attached. If no rack is attached, -------- is dis-
played.
Rack code
Shows the rack code of the rack attached. If no rack is attached, -------- is
displayed.
Number of positions
Shows the number of positions on the rack. If no rack is attached, --------
is displayed.
Shift rate
Shift rate for manual control of the sample changer.
Range 5 ... 20 °/s
Default value 20 °/s
Lift rate
Lift rate for manual control on the selected tower.
730, 778, 789, 814, 815, 855, 864
Range
5 ... 25 mm/s
Default value 25 mm/s
774, 874
Range
3 ... 12 mm/s
Default value 12 mm/s