Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 889)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 873
Dosing rate
Speed at which the start volume is to be added. The maximum dosing rate
depends on the cylinder volume of the exchange unit or dosing unit used.
Titrando, 855
Range
0.01 ... 166.00 mL/min
Selection maximum
Default value maximum
Titrino
Range
0.01 ... 150.00 mL/min
Selection maximum
Default value maximum
Pause 2
Pause 2
Waiting time, e.g. for the electrode to settle down after the start or a
reaction time after the addition of the start volume. The pause follows at
the end of all the start conditions.
Range 0 ... 999999 s
Default value 0 s
5.6.3.8.6.4 STAT pH - Control parameters
Tab: Method ▶ STAT pH ▶ Properties... ▶ Control parameters
Command name
Name of the command.
Input 25 characters
Control point
Control point at pH
Definition of the pH value to be controlled.
Titrando, 855
Range
-20.000 ... 20.000
Selection off
Default value off
Titrino
Range
-20.00 ... 20.00
Selection off
Default value off