Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1768)

9.8 Sample tables ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1752 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
6 In the dialog window Sample table 'New sample table', click on
the menu item Edit ▶ Edit line.
The dialog window Edit line - Sample table 'New sample table
opens.
7 In the list box Method, select the desired method and enter sample
data.
8 Click on [Apply].
The sample data entered will be applied in the respective line of the
sample table.
9 Repeat step 6 for each desired determination.
10 Click on [Close].
The dialog window Edit line - Sample table 'New sample table'
is closed.
11 In the dialog window Sample table 'New sample table' click on
the menu item Sample table ▶ Save as....
The dialog window Save sample table opens.
12 In the field Name enter the desired name.
13 Click on [Save].
The sample table will be saved under the name that was entered.
9.8.2 Edit sample table
How to proceed?
1 Select program part Workplace.
2 Click on the symbol or the menu item Tools ▶ Sample
table ▶ Open….
The dialog window Open sample table opens.
3 Select desired sample table.
4 Click on [Open].