Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1367)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1351
Security settings
on | off (Default value: on)
Import security settings (see Chapter 6.2.2.1, page 1330).
User administration
on | off (Default value: on)
Import user administration (see Chapter 6.2.1.1, page 1321).
[OK]
The selected data is imported.
6.3.2 Backup/Restore
6.3.2.1 Backing up configuration data automatically
Dialog window: Configuration ▶ File ▶ Backup ▶ Automatically ▶ Backup configu-
ration data automatically
Automatic backup
on | off (Default value: off)
If this check box is activated, then the configuration database is saved
automatically to the defined backup directory at the desired time interval.
The entire configuration database (including method groups and meth-
ods) is saved at this time.
If this check box is deactivated then the following parameters cannot be
edited.
Last backup
Display of date and time of the last configuration data backup.
Next backup
Date and time at which the next backup is to be carried out. The
opens the window Next backup to select the date (see Chapter 2.5.1,
page 92).
Default value Last backup + 1 month
Interval
Entry of the time interval after which an automatic backup will take place.
After each automatic or manual backup the interval entered here will be
added to the date of the Last backup and shown in the field Next
backup.