Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1614)

7.18 Balances ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1598 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Input 1000 characters
Default value empty
7.18.3 Properties - RS-232
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ RS-232
COM Port
Selection of the serial interface on the PC to which the device is connec-
ted.
Selection COM1 | COM2 | … | COMn
Default value COMn
COMn
First free COM port.
Baud rate
Transmission rate. The baud rate selected here must also be set on the
device itself.
Selection 300 | 600 | 1200 | 2400 | 4800 | 9600 | 19200 |
38400 | 57600 | 115200
Default value 9600
Data bit
Number of data bits.
Selection 7 | 8
Default value 8
Parity
Type of parity testing.
Selection None | Odd | Even
Default value None
Stop bit
Number of stop bits.
Selection 1 | 2
Default value 1
Handshake
Type of data transmission protocol.
Selection None | HW | SW
Default value None