Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 457)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 441
￭ CAL MEAS Opt
Command for measuring standard solutions for the calibration of col-
orimetric sensors.
￭ CAL MEAS pH
Measuring command for calibrating pH electrodes.
￭ CAL Spec
Execution of a wavelength calibration.
￭ CALC
Calculation of intermediate and end results, titer values and common
variables.
￭ CALL
Calling tracks (subprograms).
￭ CONTROL
Command for controlling Beckhoff instruments.
￭ CTRL
Setting remote output lines.
￭ DATABASE
Storage of the determination data in data bases.
￭ DET
Dynamic equivalence point titrations.
￭ DIGITAL IN
Reading in all analog inputs.
￭ DIGITAL OUT
Reading in all analog inputs.
￭ DOS pH
Controlled dosing with the measured quantity pH.
￭ DOS U
Controlled dosing with the measured quantity voltage U.
￭ ELT LOOP
Loop for the electrode test.
￭ ELT MEAS
Command for measuring calibration buffers for the test of pH electro-
des.
￭ EMPTY
Emptying a dosing unit.
￭ END
End command for all tracks.
￭ ERROR
Start command for the error track.
￭ EXIT
Start command for the exit track.
￭ EXPORT
Export of determination data.
￭ FLOW
Gas flow monitoring with 774 and 864 Sample Processor.