Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1238)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1222 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
1+2
Both pumps at the selected tower will be switched at the same time.
Actions
Selection Switch on | Switch off | Duration
Default value Switch on
Switch on
Switch on the pump(s).
Switch off
Switch off the pump(s).
Duration
Switch on the pump(s) for a particular period.
Range 0 ... 9999.9
Default value 10.0
Selection s | min
Default value s
5.6.7.6 STIR
5.6.7.6.1 STIR - Overview
Dialog window: Method ▶ STIR ▶ Properties... ▶ STIR - 'Command name'
Command for controlling a connected stirrer.
Devices
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 851, 852, 857, 888, 890, 901,
902, 904, 905, 906, 907
Titrino: 751, 758, 784, 785, 795, 798, 799
Conductometer: 856
Coulometer: 756, 831
Dosing Interface: 846
Titrotherm: 859
pH/Ion - Meter: 867
Sample Processor: 730, 778, 789, 814, 815, 857, 864, 874
Robotic Titrosampler: 855
Appearance
The command has the following appearance: