Metrohm tiamo 2.3 Patch 1 (process analysis) User Manual
Page 300
4.4 Templates
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
284
￭￭￭￭￭￭￭￭
tiamo 2.3 Patch 1 (for Process Analysis)
<CalDur val="" />
Column header for duration of measurement.
<header>
– <body dynamic="">
– <data>
<RowDesc> ... </RowDesc>
Buffer/Standard.
<NominalVal> ... </NominalVal>
Nominal value.
<MeasVal> ... </MeasVal>
Measured value.
<CalTemp> ... </CalTemp>
Calibration temperature.
<CalDur> ... </CalDur>
Duration of measurement in s.
</data>
</body>
</CalibrationTable>
</CalibData>
– <CalibOptData>
Calibration data colorimetric sensors
<crCalibOptDataName val="" />
Name of the colorimetric sensor.
<crCalibOptDataWavelength
val="" />
Wavelength.
<crCalibOptDatac0 val="" />
Calibration coefficient zeroth-order.
<crCalibOptDatac1 val="" />
Calibration coefficient first-order.
<crCalibOptDatac2 val="" />
Calibration coefficient second-order.
<crCalibOptDatac3 val="" />
Calibration coefficient third-order.
<crCalibOptDataConfidence
val="" />
Confidence interval.
<crCalibOptDataConfidenceUnit
val="" />
Unit of the confidence interval.
<crCalibOptDataOutlier val="" />
Number of outliers.
<crCalibOptDataCoeffDeterm
val="" />
Coefficient of determination.
<crCalibOptDataCalibTemp
val="" />
Calibration temperature.
<crCalibOptDataCalibTempUnit
val="" />
Unit of the calibration temperature.
<crCalibOptDataCalibRangeAt
val="" />
Minimum concentration of the calibration range.