Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 296)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
280 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
</data>
</CommandVars>
– <Device> Device data
– <deviceType> Device type.
<vn val="" /> Parameter name.
<vr val="" /> Parameter value.
</deviceType>
– <deviceName> ... <device-
Name> Device name.
– <instrNo> ...</instrNo> Device serial number.
– <deviceProgNo> ... <device-
ProgNo> Device program number.
– <rackName> ... </rackName> Rack name.
– <rackCode> ... </rackCode> Rack code.
– <towerNoOne> ... </tower-
NoOne> Tower number.
– <swingHeadOneType> ... </
swingHeadOneType> Type of Swing Head on tower 1.
– <swingHeadOneSerial> ... </
swingHeadOneSerial> Serial number of the Swing Head on tower 1.
– <towerNoTwo> ... </tower-
NoTwo> Tower number.
– <swingHeadTwoType> ... </
swingHeadTwoType> Type of Swing Head on tower 2.
– <swingHeadTwoSerial> ... </
swingHeadTwoSerial> Serial number of the Swing Head on tower 2.
– <devicePorts dynamic=""> Data on the peripheral devices connected.
– <Port>
<subtype val="" /> Type of the device connected to the port:
XML_PORT_DEVICE_DOS = Dosing/Exchange unit
XML_PORT_DEVICE_REMOTE = Remote Box
XML_PORT_DEVICE_STIR = Stirrer
– <dosPortName> ... </dosPort-
Name> Number of the MSB connector the dosing device has
been connected to.