Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1323)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1307
Range 0 ... 999999
Default value 10
Selection s | min
Default value s
End delay
Waiting time, after expiry of maximum waiting time
Range 0 ... 999999
Default value 0
Selection s | min
Default value s
5.6.11.7 PORT
5.6.11.7.1 PORT - Overview
Dialog window: Method ▶ PORT ▶ Properties... ▶ PORT - 'Command name'
Command for changing the port position on a multi-port valve.
Devices
This command can be executed with the following devices:
Titrando: 901, 902, 904, 905, 906, 907
Dosing Interface: 846
Appearance
The command has the following appearance:
Parameters
The parameters for the command PORT are configured in the following
dialog window:
￭ PORT - Properties
Command variables
The following command variables are generated in the method run by the
command PORT and can be used in formulas under the designation
'Command name.Variable designation':