Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1772)

9.9 Reports ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1756 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
3 Click on the menu item File ▶ Page setup… in the program win-
dow Report template.
The dialog window Page setup opens.
4 Define desired settings for the report format.
5 Click on [OK].
The dialog window Page setup is closed.
6 In the program window Report template, click on the menu item
Tools ▶ Options....
The dialog window Options for report templates opens.
7 Define desired settings for the report template.
8 Close the dialog window with [OK].
9 Select desired module symbol on the Module bar and place it on the
report template by creating a field with the left mouse button.
The properties window for the corresponding module opens auto-
matically.
10 Enter desired settings for the module.
11 Click on [OK].
The properties window is closed.
12 Repeat steps 7 and 8 for each desired module.
13 Click on the symbol or the menu item File ▶ Save as....
The dialog window Save report template opens.
14 In the field Name enter a name.
15 Click on [Save].
The report template is saved under the name entered.