Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1108)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1092 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
￭ CAL MEAS Conc
Measurement of standards for the calibration of ion-selective electro-
des (ISE electrodes).
￭ ELT LOOP
Loop command for the test of pH electrodes.
￭ ELT MEAS
Command for measuring calibration buffers for the test of pH electro-
des.
￭ CAL LOOP Opt
Loop command for the calibration of colorimetric sensors.
￭ CAL MEAS Opt
Command for measuring standard solutions for the calibration of col-
orimetric sensors.
￭ CALL LOOP pH
Calibration loop for the calibration of pH electrodes.
￭ 5.6.5.13CAL MEAS pH
Measurement of buffers for the calibration of pH electrodes.
5.6.5.2 Calibrating with manual solution exchange
Program part: Method ▶ Calibration commands
The basic structure of a calibration method with manual solution
exchange looks as follows: