Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 139)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 123
Balance
Selection of the balance from which data is to be imported.
Selection Device name
Selection Always accept data | Accept data only for
active window
Default value Always accept data
Always accept data
If this option is selected, then the data sent from the balance is impor-
ted into the open sample table for which this balance is defined as
data source.
Accept data only for active window
If this option is selected, then the data sent from the balance is only
imported into the open sample table if this is actively selected (i.e.
when the window has the focus).
Confirmation necessary to accept data during the determination.
on | off (Default value: off)
If this option is switched on, then data is imported during a determination
only if the Data input dialog of a REQUEST command is opened.
Import from a barcode reader
on | off (Default value: off)
If this option is activated, then external data from the selected barcode
reading device will be imported into the opened sample table. The device
properties of the barcode reader will define the field into which the data is
imported (see Chapter 7.19.4, page 1604).
Barcode reader
Selection of the barcode reader from which data is to be imported.
Selection Device name
Selection Always accept data | Accept data only for
active window
Default value Always accept data
Always accept data
If this option is selected, then the data sent from the barcode reader is
imported into the open sample table for which this barcode reader is
defined as data source.
Accept data only for active window
If this option is selected, then the data sent from the barcode reader is
only imported into the open sample table if this is actively selected (i.e.
when the window has the focus).