Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1366)

6.3 Configuration data ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1350 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Export templates
on | off (Default value: on)
Import saved export templates (see Chapter 4.4.4.1, page 260).
Control chart templates
on | off (Default value: on)
Import saved control card templates (see Chapter 4.4.2.1, page 251).
Overlay curve templates
on | off (Default value: on)
Import saved curve overlay templates (see Chapter 4.4.3.1, page 255).
Buffer data
on | off (Default value: on)
Import configuration data for custom buffers (see "Buffer table", page
1354).
Conductivity standards
on | off (Default value: on)
Import configuration data for conductivity standards (see Chapter
6.3.3.4.1, page 1358).
E-mail templates
on | off (Default value: on)
Import saved e-mail templates (see Chapter 6.3.3.5, page 1360).
Text templates
on | off (Default value: on)
Import saved text templates (see Chapter 3.5, page 130).
Sample assignment table
on | off (Default value: on)
Import a saved sample assignment table (see Chapter 3.4, page 127).
Electrode type templates
on | off (Default value: on)
Import saved electrode type templates (see Chapter 6.3.3.6.1, page
1362).