Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1295)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1279
5.6.10.3 CALL
5.6.10.3.1 CALL - Overview
Dialog window: Method ▶ CALL ▶ Properties.. ▶ CALL - 'Command name'
Command for calling tracks. Optionally a condition can be defined
which needs to be fulfilled in order to execute the CALL command.
Appearance
The command has the following appearance:
Each command can include to 10 call-ups.
Parameters
The parameters for the command CALL are configured in the following
dialog window:
￭ CALL
Command variables
The following command variables are generated in the method run by the
command CALL and can be used in formulas under the designation
'Command name.Variable designation':
Identifi-
cation Description
.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
not ever been started
.FIN Command status; 1 = Command has been ended at
least once, 0, invalid (variable not available) = Com-
mand has never been ended