Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1460)

6.8 Subwindow Colorimetric sensors ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1444 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Landscape
Output in landscape format.
[OK]
The sensor table is shown in the required format as a PDF file and can be
opened directly with Acrobat Reader; it can then be printed out and/or
saved.
6.8.3 Properties - Colorimetric sensor
6.8.3.1 Editing the sensor properties
Dialog window: Configuration ▶ Colorimetric sensors ▶ Edit ▶ Properties... ▶ Col-
orimetric sensor - %1
The Properties window for the colorimetric sensor selected in the Sensor
table in which the parameters of the colorimetric sensor can be edited is
opened with the menu item Edit
▶ Properties... in the subwindow Col-
orimetric sensors. It consists of the following tabs:
￭ Colorimetric sensor
General information regarding the colorimetric sensor, e.g. name,
device used and comment.
￭ Calibration data
Information about the calibration of the colorimetric sensor.
￭ Limit values
Definition of the limit value monitoring for outliers and the coefficient
of determination.
￭ History
Display of the last 10 calibration values.
6.8.3.2 Properties - Colorimetric sensors
Tab: Configuration ▶ Colorimetric sensors ▶ Edit ▶ Properties... ▶ Colorimetric
sensor
Name
Name of the sensor.
Input 24 characters
Comment
Possibility to enter remarks about the sensor.
Input 24 characters
Default value 'empty'