Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1708)

8.4 Manual control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1692 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
[Set]
Sets the analog output to the mapping value indicated.
Setting a default
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Mapping
Display of the mapped value range.
Current value
Display of the adjacent value.
[Set]
Resets the analog output to the default value in the configuration.
Graphical display
8.4.6.6 Stepping motors
8.4.6.6.1 Stepping motors - Overview
Program part: Manual control
If in the device tree the branch Stepping motors is selected, all stepping
motors can be commonly controlled in the subwindow functions/parame-
ters. In the subwindow for the graphical display the status of all connec-
ted stepping motors is shown in their physical order.