Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 159)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 143
￭ Conditioning condition not fulfilled
After conditioning starts, the status switches to COND BUSY. A new
determination can be started in this status with [Start], even though
the conditioning requirement is not fulfilled. Conditioning can also be
canceled with [Stop] or interrupted with [Hold] and resumed with
[Cont]. If an error occurs during conditioning, then neither the error
track nor the exit track will be run through.
￭ Conditioning condition fulfilled
If the conditioning requirement has been fulfilled, then the status will
switch to COND READY. A new determination can be started in this
status with [Start]. Conditioning can however also be canceled with
[Stop] or interrupted with [Hold] and resumed with [Cont]. As long
as the determination has not yet been started, the conditioning
requirement will continue to be monitored on a continuous basis.
3.6.3.9 Single determination - Properties
3.6.3.9.1 Properties - Overview
Dialog window: Workplace ▶ Run ▶ Single determination ▶ Properties Run win-
dow ▶ Properties - Single determination
The properties for the tab Single determination are set on the following
tabs:
￭ Display
Definition of the columns that are to be displayed on the tab Single
determination.
￭ Edit
Definition of sample data which are copied automatically into the next
determination.
￭ Process
Options for the processing of single determinations.
￭ Data import
Enabling/disabling the import of external data for fields on tab Single
determination.
3.6.3.9.2 Properties - Display
Dialog window: Workplace ▶ Run ▶ Single determination ▶ Properties Run win-
dow ▶ Properties - Single determination
Definition of the operating elements and columns that are to be displayed
on the tab Single determination..
Operating elements
[Hold]/[Cont]
on | off (Default value: on)
Enable/disable the display of the operating buttons [Hold] or [Cont].