Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 594)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
578 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Titrando, 855
Range
0.00000 ... 9999.99 mL
Default value 0.00000 mL
Titrino
Range
0.00 ... 999.99 mL
Default value 0.00 mL
Dosing rate
Speed at which the start volume is to be added. The maximum dosing rate
depends on the cylinder volume of the exchange unit or dosing unit used.
Titrando, 855
Range
0.01 ... 166.00 mL/min
Selection maximum
Default value maximum
Titrino
Range
0.01 ... 150.00 mL/min
Selection maximum
Default value maximum
Start measured value
Note
Only displayed for Titrando and 855.
Start measured value pH
Once the start measured value is reached, the dosing of the start volume
is stopped and the next start condition is processed or the titration is star-
ted. If the start measured value is achieved by the addition of a start vol-
ume, then titration will start directly.
Range -20.000 ... 20.000
Selection off
Default value off
Dosing rate
Speed at which the start volume is added until the start slope is reached.
The maximum dosing rate depends on the cylinder volume of the
exchange unit or dosing unit used.
Range 0.01 ... 166.00 mL/min
Default value 5.00 mL/min