Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 304)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
288 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
<limit> ... </limit> Limit value type.
<limitVal> ... </limitVal> Limit value.
<monVal> ... </monVal> Measured value.
<volume> ... </volume> Volume in mL.
<otherVal> ... </otherVal> Temperature, measured value pH or measured value mV.
<action> ... </action> ... Action.
</data>
</body>
</MonitorTable>
</Monitoring>
</Monitoring>
</Command>
</CommandData>
4.4.4.3.7 XML export - Common Variables
XML export
– <Comvars dynamic> Common variables
– <data>
<subtype val="" />
<vr val="" /> Variable value.
<vs val="" /> Variable status:
OK = The value is ok and has not been monitored.
OKL = The value is ok and has been monitored.
LE = The value has exceeded the limit and has not been
monitored.
LEL = The value has exceeded the limit and has been
monitored.
NV = The value is invalid and has not been monitored.
NVL = The value is invalid and has been monitored.