Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1689)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 8 Manual control
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1673
all except 730
Selection
Tower | External positions
Default value Tower
730 only
Selection
Tower 1+2 | External positions
Default value Tower 1+2
Shift position for
If this option is selected, the current lift position is assigned to the shift
position of the tower.
all except 730
Selection
Tower | External positions
Default value Tower
730 only
Selection
Tower 1+2
Default value Tower 1+2
Special position for
If this option is selected, the current lift position is assigned to the special
position of the tower.
all except 730
Selection
Tower | External positions
Default value Tower
730 only
Selection
Tower 1+2
Default value Tower 1+2
Swing position
If this option is selected, the current lift position is assigned to the swing
position of the robotic arm.
Selection External positions
Default value External positions
[Assign]
Trigger assignment. During the assignment the cursor is displayed as hour-
glass.
Assigning robotic arm position
Assign the current rack position to a specific external robotic arm position.