Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1289)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1273
Device
Device name
Selection of a device from those available in the device table. The only
devices which shall be offered are those with which the command can
run.
Selection 'Device name' | not defined
Default value not defined
not defined
In this case, the device name must be assigned by the user at the start
of the method.
Device type
Display or selection of the device type. If a device is selected under Device
name, then this Device type field can no longer be edited, and the
device type belonging to the selected device is displayed instead
If the option not defined is selected as Device name, any device types
or device groups which are able to execute the command can be selected,
independently of the devices in the device table.
Selection AND | Mettler | Ohaus | Precisa | Sartorius |
Shimadzu
Default value Precisa
Weighing command
Instructions
Character string that is sent via the RS-232 interface.
AND
Input
S
Mettler
Input
S
Ohaus
Input
1S
Precisa
Input
P1
Sartorius
Input
\1bP