Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1363)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1347
Export templates
on | off (Default value: on)
Export saved export templates (see Chapter 4.4.4.1, page 260).
Control chart templates
on | off (Default value: on)
Export saved control card templates (see Chapter 4.4.2.1, page 251).
Overlay curve templates
on | off (Default value: on)
Export saved curve overlay templates (see Chapter 4.4.3.1, page 255).
Buffer data
on | off (Default value: on)
Export configuration data for custom buffers (see "Buffer table", page
1354).
Conductivity standards
on | off (Default value: on)
Export configuration data for conductivity standards (see Chapter
6.3.3.4.1, page 1358).
E-mail templates
on | off (Default value: on)
Export saved e-mail templates (see Chapter 6.3.3.5, page 1360).
Text templates
on | off (Default value: on)
Export saved text templates (see Chapter 3.5, page 130).
Sample assignment table
on | off (Default value: on)
Export the saved sample assignment table (see Chapter 3.4, page 127).
Electrode type templates
on | off (Default value: on)
Export saved electrode type templates (see Chapter 6.3.3.6.1, page
1362).