Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1680)

8.4 Manual control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1664 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Instruments
The stirrer functions can be carried out with stirrers that are connected to
the following devices:
Titrino: 751, 758, 785, 784, 785, 794, 795, 798, 799
Titrando: 808, 809, 835, 836, 841, 842, 857, 859, 888, 890, 901, 902,
904, 905, 906, 907
Dosing Interface: 846
Conductometer: 856
Coulometer: 756, 831
pH/Ion - Meter: 867
Sample changer: 730, 774, 778, 789, 814, 815, 864, 874
Robotic Titrosampler: 855
Photometer: 089 (stirrer is built-in in the photometer)
8.4.2.2 Stirring - Switching on/off
Program part: Manual control
Here the stirrers can be switched on and off. This tab appears when
selecting a single stirrer as well as with all stirrers.
Stirring rate
Selection of the stirring rate. This parameter can also be modified live.
all instruments except for photometer
Range
–15 ... 15
Default value 8
Photometer only
Range
1 ... 15
Default value 3
[Start]
Start stirring for the selected stirrer.
[Stop]
Stop stirring for the selected stirrer.