Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 346)

4.5 Determination overview ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
330 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
BP#
Endpoint that has been determined by automatic break point evalua-
tion.
Selection FP#
FP#
Endpoint that has been determined by automatic fixed point evalua-
tion.
Volume
Volume value in mL for endpoint.
Measured value
Measured value (pH) for endpoint.
ERC
ERC value for the endpoint.
Time
Time for the endpoint.
Temperature
Temperature for the endpoint.
Note
Manually set endpoints only have two measured quantities, for the
other measured quantities invalid is entered.
[Delete]
Delete selected endpoint.
[Exit]
Close dialog window.
4.5.2.6.4.6.4 Curve evaluation - Properties
4.5.2.6.4.6.4.1 Properties curve evaluation - Overview
Dialog window: Database ▶ Determinations ▶ Reprocess... ▶ Reprocess-
ing ▶ Curve evaluation ▶ [Edit] ▶ Curve evaluation ▶ Icon 'Properties and Graphi-
cal display' ▶ Properties - 'Curve #'
The properties of the curve display in the dialog window Properties -
'Curve #' can be set on the following 4 tabs:
￭ x axis
Parameters for the graphical display of the curves on the x axis.