Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1486)

6.10 Subwindow Global variables ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1470 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
limits are observed is not monitored, i.e. exceeding these limits does not
trigger any action.
Warning limits for global variable
on | off (Default value: off)
If this option is enabled then the values of the global variables will be
shown in orange if these limits are exceeded.
Lower limit
Lower warning limit for global variable.
Range -1.0 E+99 ... 1.0E+99 (max. 10 digits)
Upper limit
Upper warning limit for global variable.
Range -1.0 E+99 ... 1.0E+99 (max. 10 digits)
Intervention limits for global variable
on | off (Default value: off)
If this option is enabled then the values of the global variables will be
shown in red if these limits are exceeded.
Lower limit
Lower warning limit for global variable.
Range -1.0 E+99 ... 1.0E+99 (max. 10 digits)
Upper limit
Upper warning limit for global variable.
Range -1.0 E+99 ... 1.0E+99 (max. 10 digits)