Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 712)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
696 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
￭ SET Upol
Amperometric measurement with selectable polarization voltage
(measured value current I).
￭ SET Ipol
Voltametric measurement with selectable polarization current (meas-
ured quantity voltage U).
5.6.3.4.2 SET - Control range
Menu item: Method ▶ SET ▶ Properties... ▶ Control parameters
Set a large control range for steep curves and a small control range for flat
ones. A good approximation for the start of the control range is given by
the point where the tangents intersect.
5.6.3.4.3 SET pH
5.6.3.4.3.1 SET pH - Overview
Dialog window: Method ▶ SET pH ▶ Properties... ▶ SET pH - 'Command name'
Command for Set endpoint titrations with potentiometric pH measure-
ment.
Instruments
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 857, 888, 901, 902, 904, 905,
906, 907
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 785, 794, 798,
799
Robotic Titrosampler: 855
Appearance
The command has the following appearance: