Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 262)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
246 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Selection original | proportional | non-proportional
Default value original
original
Original size.
proportional
Proportional enlargement or diminishment.
non-proportional
Non-proportional enlargement or diminishment.
4.4.1.4.3.10 Report template - Line
Program window: Database ▶ Report template
Any line can be inserted in the report template.
Insert
In order to insert a line in a report template the corresponding symbol
must be selected on the Module bar and then placed on the report tem-
plate by creating a field with the left-hand mouse key.
Properties
X pos.
x-position within the permitted section.
Range 0.0000 ... (max. page width) mm
Y pos.
y-position within the permitted section.
Range 0.0000 ... (max. page height) mm
Length
Length of the line.
Range 0.0 ... (max. page width) mm
Angle
Angle of the line.
Range 0 ... 360.000 °
Thickness
Thickness of the line.
Range 0.1 ... 10.0 mm
Default value 0.5 mm