Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 314)

4.5 Determination overview ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
298 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
</data>
– <min> ... </min> ... Minimum value of the result.
– <max> ... </max> ... Maximum value of the result.
</StatisticsShort>
– <StatisticsOverview content-
Type="table"> Statistical data overview
<subtype val="" />
– <tableHeader> Column headers (dynamic).
– <th>
<vr val="" /> Column header.
</th>
</tableHeader>
– <tableBody> Table content (dynamic).
– <td>
<vr val="" /> Field content.
</td>
</tableBody>
</StatisticsOverview>
</Statistics>
4.5 Determination overview
4.5.1 Determination overview - General
4.5.1.1 Determination overview - Overview
Subwindow: Database ▶ Determination overview
General
The subwindow Determination overview shows selected data for the
determinations contained in the open database in tabular form. It is
always shown in the program part Database, i.e. it cannot be removed
from the Database view. The subwindow can be enlarged and reduced as
required; it can also be maximized.
Elements
The subwindow Determination overview includes the following tools:
￭ Determination table
￭ Filter selection