Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1010)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
994 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
the drift will be calculated automatically according to the following equa-
tion:
Titrando, 855, 867
Range
0 ... 999999 s
Default value 215 s
Titrino
Range
0 ... 9999 s
Default value 215 s
Measuring interval
Time interval for entering a measuring point in the measuring point list.
Titrando, 855, 867
Range
0.1 ... 999999.0 s (Increment: 0.1)
Default value 2.0 s
Titrino
Range
0.08 ... 16200 s (Increment: 0.08)
Default value 2.0 s
Stop measured value
Stop when the entered measured value has been reached since the start
of the measurement.
Titrando, 855, 867
Range
-20.0 ... 150.0 °C
Selection off
Default value off
off
No stop.
Measurement without drift control
If the option Measurement without drift control has been selected,
then the following parameters will be displayed:
Duration of measurement
Maximum period of time for measurement.
Titrando, 855, 867
Range
0 ... 999999 s
Default value 600 s