Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 930)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
914 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
5.6.3.8.7.10 STAT U - Fixed endpoint evaluation
Dialog window: Method ▶ STAT U ▶ Properties... ▶ Additional evaluations ▶ Fixed
endpoint evaluation ▶ [New]/[Properties] ▶ Fixed endpoint evaluation #
Quantity
Selection of the fixed measured quantity to which the associated values
for the other quantities are to be interpolated from the list of measured
points.
Selection Measured value | Time | Volume
Default value Measured value
Fix value
Value of the fix endpoint.
Measured value
Range
-2000.0 ... 2000.0 mV
Time
Range
0.0 ... 999999.9 s
Volume
Range
0.00000 ... 9999.99 mL
5.6.3.9 TET
5.6.3.9.1 TET - Overview
Dialog window: Method ▶ TET ▶ Properties... ▶ TET - 'Command name'
Command for thermometric titration with the 859 Titrotherm.
Instruments
This command can be executed with the following device:
Titrando: 859
Appearance
The command has the following appearance:
Parameters
The parameters for the command TET are configured on the following
tabs: