Yaskawa Sigma-5 User Manual: Design and Maintenance - Rotary Motors - Analog Voltage and Pulse Train Reference - Manual (Page 421)

Revision History
The revision dates and numbers of the revised manuals are given on the bottom of the back cover.
MANUAL NO. SIEP S800000 45B
Published in Japan September 2009 07-6
Date of original
publication Date of
publication
Revision number
2 -1
WEB revision number
45
Date of
Publication
Rev.
No.
WEB
Rev.
No.
Section Revised Content
October 2014 0 Back cover Revision: Address
September 2014 0 9.1.3 (2) Revision: Description of analog signal input timing
July 2014 0 4.3.1 Addition: Information on types of safety function’s jumper connectors
6.1.3 Revision: Output unit when using an SGMCS direct drive servomotor
9.1.4, 9.3.5 Addition: External encoder by Heidenhain (models: LIC4100-series models)
10.1.1, 10.1.2 Addition: A.F50
July 2013 0 Preface, 1.3.2 Revision: Description of Harmonized Standards
EN 55011 /A2 changed to EN 55011
Back cover Revision: Address
March 2013 0 Back cover Revision: Address
September 2012 0 Back cover Revision: Address
February 2012 0 – Based on Japanese user’s manual, SIJP S800000 45J <17> printed in August 2011.
All chapters Completely revised
Back cover Revision: Address
September 2011 0 – Based on Japanese user’s manual, SIJP S800000 45I <16> printed in April 2011.
All chapters Completely revised
April 2011 0 1.5 Revision: Illustration of CD
March 2011 0 Front cover Addition: Servomotor model SGMSV
1.4.4, 1.4.5,
1.5.2, 8.1, 11.3
Addition: Description of SGDV-††††††B SERVOPACKs
9.3.5 Addition: External encoder made by Mitutoyo
ST788A/ST788AL
ST789A/ST789AL
9.3.3 (2), 9.3.5 Addition: Notes when using external encoders
December 2010 0 – SIEP S800000 45D<5>-1 available on the web.
October 2010 1 Front cover Revision: Format
9.1.4 (4), 9.3.5
Index
Revision: Sony Manufacturing Systems Corporation changed to Magnescale Co., Ltd.
9.3.3 (2)
11.2.2
Revision: Setting unit of Pn281
1 pulse/pitch changed to 1 edge/pitch
Back cover Revision: Address, format
April 2010 0 – SIEP S800000 45D<4>-1, available on the web.
April 2010 1 5.9.5 (2) Revision: Description of the initial incremental pulses
6.8.1 (4), (5) Revision: Applicable control method
7.15 (2) Revision: Display after Operation in step 6
March 2010 0 – Based on Japanese user’s manual, SIJP S800000 45G<10>-1, available on the web in March
2010.
All chapters Completely revised
October 2009 0 – SIEP S800000 45C<2>-1, available on the web.
Back cover Revision: Address
16
15
14
13
12
11
10
9
8
7
6
5
4
3