Removing batteries – Nikon Multi-Power Battery Pack MB-D12 User Manual
Be careful not to drop batteries or the holder.
1 Turn the MB-D12 battery-chamber latch to and remove the battery holder (Figure E).
2 Remove the battery or batteries from the holder.
While pressing the holder PUSH button, slide
the battery toward the button. The battery
can then be removed as shown.
The procedure for removing the EP-5B power
connector is the same as that for the EN-EL15.
Remove the batteries as shown. Be careful
not to drop the batteries when removing
them from the holder.
Slide the battery release in the direction
indicated by the arrow (Y) and remove the