Agilent Technologies Signal Analyzer N9030a - Manual (Page 1046)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Save
•
Sweep Time
•
Start Frequency
•
Stop Frequency
•
Average Count (actual; not the limit for the instrument)
•
Average Type
•
RBW
•
RBW Filter Type
•
RBW Filter BW Type
•
VBW
•
Sweep Type (FFT vs. Swept)
•
Log/Lin X Scale (sometimes called Log Sweep)
•
Preamp (on/off, band)
•
Trigger (source, level, slope, delay)
•
Phase Noise optimization setting
•
Swept IF Gain
•
FFT IF Gain
•
AC/DC setting (RF Coupling)
•
FFT Width
•
External Reference setting
•
Input (which input is in use)
•
RF calibrator on/off
•
Attenuation
Because any inactive trace can have a value that does not match the rest of the measurement,
when performing a Save the metadata for each trace is pulled from the individual trace, not from
the measurement.
A revision number is also included in the trace database, to allow for future changes.
The choices for the various 1 of N and binary fields are as follows:
•
Average Type: Power(RMS), Voltage, LogPower(Video)
•
RBW Filter Type: Flattop, EMI, Gaussian
1046 Remote Language Compatibility Measurement Application Reference