Agilent Technologies Signal Analyzer N9030a - Manual (Page 1299)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
System
Mode All
Remote Command :SYSTem:COMMunicate:LAN:SCPI:SOCKet:CONTrol?
Example :SYST:COMM:LAN:SCPI:SOCK:CONT?
Preset This is unaffected by Preset or Restore System Defaults, Misc.
State Saved No
Range 0 to 65534
Min 0
Max 65534
Initial S/W Revision Prior to A.02.00
Reset Web Password
The embedded web server contains certain capability which are password protected; modifying
the LAN configuration of the instrument, and access to web pages that can change the settings of
the instrument. The default password from the factory is ‘agilent’ (without the quotes). The
control provided here is the means to set the web password as the user desires, or to reset the
password to the factory default.
Selecting Reset web password brings up a control for resetting the password as the user desires,
or to the factory default. A keyboard is required to change the password from the factory default
of ‘agilent’ or to set a new password that contains alphabetic characters. The control is:
If this control is entered without an external keyboard or mouse connected, you can cancel the
control by pressing the Cancel (ESC) front-panel key.
Key Path System, I/O Config
Mode All
Initial S/W Revision Prior to A.02.00
Remote Language Compatibility Measurement Application Reference 1299