Agilent Technologies Signal Analyzer N9030a - Manual (Page 561)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
BW
Key Path BW, RBW Control, Filter BW
Example BAND:TYPE DB3
Readback –3 dB
Initial S/W Revision Prior to A.02.00
–6 dB
Selects the filter bandwidths where the bandwidth is defined at the –6 dB points. This uses the
normal RBW filters, but the value displayed on the key, active function line and screen
annotation changes to reflect the –6 dB bandwidth instead of the –3 dB bandwidth.
Key Path BW, RBW Control, Filter BW
Example BAND:TYPE DB6
Readback –6 dB
Initial S/W Revision Prior to A.02.00
Noise
Selects the noise filter bandwidths. This uses the normal RBW filters, but the value displayed on
the key, active function line and screen annotation changes to reflect the equivalent noise
bandwidth, instead of the –3 dB bandwidth.
Key Path BW, RBW Control, Filter BW
Example BAND:TYPE NOIS
Readback Noise
Initial S/W Revision Prior to A.02.00
Impulse
Selects the impulse bandwidths. This uses the normal RBW filters, but the value displayed on the
key, active function line and screen annotation changes to reflect the equivalent impulse
bandwidth instead of the –3 dB bandwidth.
Key Path BW, RBW Control, Filter BW
Example BAND:TYPE IMP
Readback Impulse
Initial S/W Revision Prior to A.02.00
Remote Language Compatibility Measurement Application Reference 561