Agilent Technologies Signal Analyzer N9030a - Manual (Page 66)

2 About the N9061A Measurement Application
Installing the N9061A Application
Installing the N9061A Application
N9061A is a licensed application for X-Series instruments. The option for 8560 Series emulation is
N9061A-2FP, and the option for 8566/8568 emulation is N9061A-1FP. The application must be
installed and licensed on a suitable X-Series instrument (PXA, MXA, or EXA) for it to work
correctly.
Installation
The license is installed on the X-Series instrument in one of the following ways:
If you purchased a new X-Series instrument with N9061A, then the product is already installed
and licensed, and is ready to use.
If you have an X-Series instrument and have subsequently purchased N9061A, then you can
download N9061A from the Agilent website. N9061A is installed as part of a software upgrade. See
the links below for instrument software upgrades. After upgrading your software you should then
use your entitlement certificate to license the product (see
"Licensing" on page 66 below).
The latest revision of the software may be downloaded from:
l
http://www.agilent.com/find/pxa_software
l
http://www.agilent.com/find/mxa_software
l
http://www.agilent.com/find/exa_software
No calibration is required after N9061A is installed.
Licensing
For details of how to install and activate an N9061A license, see the section "Agilent X-Series
Analyzer Licensing Options" in the chapter "Instrument Operating System" of the X-Series "Getting
Started and Troubleshooting Guide", which may be downloaded in PDF format from:
http://www.agilent.com/find/xseries_getting_started_guide
Verify the Installation
l
Press System > Show > System, to display the list of installed applications.
l
Verify that N9061A appears in the Option list.
If you require further assistance, please contact the Agilent support team.
66 Remote Language Compatibility Measurement Application Reference